A closed security concept for test halls and perimeter
Vilsbiburg, close to Munich in Germany, is the location of the headquarters and production plant of Flottweg SE, the separation technology specialist. In 2021, the company inaugurated its new Factory II, expanding its production area by approximately 18,000 m2. A decisive element in protecting its business premises of just over six hectares and maintaining its status as an Authorized Economic Operator (AEO) is the video surveillance solution supplied by Dallmeier.
By: Christina Lüders, Press & Media Manager, Dallmeier electronic; E-mail: Christina.Lueders@dallmeier.com
Before they can undergo further industrial processing, crude oil, water, liquid chemicals, and beverages have to be purified, or certain constituents must be separated. The systems that perform this mechanical separation are made by Flottweg SE. At its factory facilities in Vilsbiburg, among other products, the company manufactures the largest decanter centrifuge in the world. Responsibility and quality are inseparable elements of the company philosophy. This applies to process optimization and product quality assurance and protecting its employees and the company premises.
Security for six hectares of company premises
For the new building in Vilsbiburg with about 18,000 square meters of production area and six hectares of property, the company searched for a security solution that met the latest technical standards, not least to enable it to satisfy the criteria for AEO certification. Robert Waxenberger, Deputy IT Director for Flottweg SE, describes the requirements for the new solution as “Innovative, sustainable, Made in Germany, GDPR compliant“. His experience from working on Factory I, in which single-sensor cameras from Dallmeier have been working reliably for years, was decisive for this new selection. In close cooperation, Flottweg and the security installer Franz Sicherungstechnik developed a new security concept for Factory II with components from the Dallmeier portfolio, consisting of the Panomera multifocal sensor cameras, megapixel dome cameras, the IPS 10.000 recording system, and the SeMSy Compact video management software.
“Unmanned” test run
The centrifuges and decanters undergo a stringent test procedure before shipping, and the test runs are conducted under camera surveillance in nine test bunkers built especially for this purpose. “If anything untoward should happen during a test run, the parts would come at you with unimaginable force. For the safety of our employees, the test process must be carried out “in the absence of humans”. But since we also have to observe the proper conduct of the testing, this is where we use cameras”, explains Robert Waxenberger. The dome cameras help the operator monitor the process.
No AEO certification without closed perimeter protection
With an export ratio of about 80 percent, certification as an Authorized Economic Operator (AEO) is immensely important to Flottweg, as this simplifies shipping arrangements enormously. One part of the requirements for obtaining the certification is a triad of physical security measures. These consist of securing the perimeter, ensuring surveillance of the dispatch hall, and visual supervision of the loading area. The premises surrounding the factory hall are monitored inside a “closed perimeter“. Each section of fence with a corridor of about 90 meters is subject to uninterrupted detection by Panomera S-series cameras. The multifocal sensor systems are ideal for long distances along the fence because their special sensor concept allows them to guarantee high-quality image resolution even at long distances. Consequently, movements of any origin, by people or vehicles, for example, can be tracked for long stretches with no loss of recording or camera switches. And besides protection against unauthorized entry and assistance with the incident investigation, the 1,700 square meters of shipping hall and dispatch area as well as the loading area are subject to visual monitoring by cameras.
More expensive hardware – but lower overall costs
Apart from the image quality, the low costs of infrastructure were a powerful argument in favor of installing the Panomera systems: “If you only consider the hardware components, comparison offers are cheaper. But if you look at the overall situation, we only need a fraction of the infrastructure in terms of cables, masts, networks, and cameras. So as regards overall costs, the Panomera is the least expensive variant. And it also makes the operator’s job much easier because he no longer has to keep track of the images from countless cameras on the monitor wall, there are only a few to watch”, explains Andreas Franz, Managing Director, Franz Sicherungstechnik.
Alarm activation at the gatehouse
For alarm activation and analysis, Flottweg uses the “SeMSy Compact” Video Management Software (VMS). SeMSy Compact is the optimum VMS solution for smaller and mid-level requirements, and as an innovative assistance system makes it easy for operators to find sequences of interest rapidly with the “Convenient search” function. In conjunction with a graphical user interface in the form of a linked site plan and a user-friendly dashboard, incidents can be categorized quickly and enable efficient investigation management.
Easy installation thanks to Mountera
For Flottweg too, the prize-winning Mountera installation concept (iF Design Award & Red Dot Award Winner) proves its efficiency when installing the Panomera cameras. Andreas Franz is impressed: “Mountera has made our lives much easier. A Panomera system weighs 17 kilograms, and the quick-lock design makes installation much simpler.” Behind the automated access management system for employees is the new Dallmeier number plate recognition system. The ANPR cameras and associated software read the vehicle number plates and the barrier opens automatically for numbers that are registered. “For the employees, this makes convenient access by vehicle possible, and Flottweg has the certainty that no unauthorized vehicles are present on company premises,” says Andreas Franz. But suppliers and shippers approved by Flottweg as part of the AEO certification and registered in advance also benefit from easier access to the loading bays.
Privacy & Security by Design
“As a manufacturer, we have a responsibility to supply our customers with safe products”, says Christian Linthaler, Dallmeier Sales Director national/international. “With our guiding principle “Privacy by Design“, we offer a comprehensive range of options for data protection and data privacy settings on our products.” The privacy of employees can be protected via “Privacy Zones” in the camera settings. Sensitive employee areas can, for example, be “blacked out” or completely excluded from the surveillance area. “As global players with local roots, both Flottweg SE and Dallmeier combine tradition with leading-edge methods. At the same time, we have the same requirements when it comes to quality for planning, implementation, and products. We are very glad that once again we decided on a Dallmeier solution in cooperation with Franz Sicherungstechnik.”
